Bottle top......

Thought I'd share with you this simple idea of adding bling to a bottle top.I tend to do this to all of my bottle tops as I want them to be a little more than just an image stuck on.

Materials needed

Image(I've used Crafty Individuals), punch, glossy accents metal foil, glue stick.alchohol ink.

turn cap over and use the reverse side, fill the rim edge with glossy accents

 and punch out an image that you want to use.

whilst the glossy accents is still wet put a couple of drops of alchohol ink

and let it seep around the edge.

This will dry to the bottom of the rim for an enameled look.

select the colour foil you want to use and apply glue in places around the image,

 use the glue sparingly

as you don't want to put to much foil on the image.

apply image to centre of cap using glossy accents and then apply

glossy accents to the top of the image

making sure you have covered the whole of the top.

the worst bit is waiting for the glossy accents to dry

takes an hour+, after its dried you can add foil to the rim of the bottle cap

using your glue stick the same as you did when adding foil to the image.

Hope you like my mini tutorial, this embellishment was used on the card in the previous post.

thanks for taking a peek.

hugs